High Carbon Wire Rod
Table of content
The product
The wire rods produced by this plant are intended for various applications.
High carbon wire rods G3V80 and G3V82 are destined to the production of braids and strands for pre-stressed concrete as they reach high ductility strengths testified by breaking point values till 1240 MPa, with a minimum necking of 30%.
High carbon wire rods G3V60 and G3V72 are used to produce meshes to reinforce tyres or to produce springs.
The Jumbo® coil produced in Osoppo obtained the EPD Certification – Environmental Product Declaration – by the certifying partner ICMQ, the Institute for certification and quality branding for products and services for construction.
Medium carbon wire rod
| Type | Classification | Technical sheet | Applications |
| G3V42 | EN ISO 16120-4 C42D2 | SPV101i | For drawing and galvanizing |
| G3V55 | EN ISO 16120-4 C55D2 | SPV103i | For drawing and cold rolling |
| G3V60 | EN ISO 16120-4 C60D2 | SPV110i | For drawing |
| G3V66 | EN ISO 16120-4 C66D2 | SPV104i | For drawing of tyre reinforcing wires |
High carbon wire rod
| Type | Classification | Technical sheet | Applications |
| G3V72 | EN ISO 16120-4 C72D2 | SPV105i | For drawing of wire for mechanical springs |
| G3V80 | EN ISO 16120-4 C80D2 | SPV107i | For drawing of wire for pre-stressed concrete stranding |
| G3V82 | EN ISO 16120-4 C82D2 | SPV108i | Drawing and pre-stressed concrete stranding. For railway sleepers |
Sales Organization.
A continuous and reliable service is guaranteed by Pittini Group’s Sales Department.
Contact our designated representative: