Meshes in Slovenia, Croatia, Serbia
Table of content
The product
The Kovinar facility of the Pittini Group, based in Jesenice, is devoted to manufacturing electro-welded meshes for the countries of the Balkan Peninsula and namely Slovenia, Croatia and Serbia, thus ensuring comprehensive commercial and technical support as well as high quality products thanks to continuous investment in plants made to achieve the highest technological standards.
Download technical sheet Meshes
The standard electrowelded meshes produced in Osoppo obtained the EPD Certification – Environmental Product Declaration – by the certifying partner ICMQ, the Institute for certification and quality branding for products and services for construction.
The production site in Kovinar also specialises in the production of customized electro-welded wire meshes for Slovenia, Croatia and Serbia.
Standard Electrowelded Meshes SI, HR, SRB, BiH, ME, MT
| Steel Grade | Country | Standard |
| B500A |
Slovenia |
STS-05/007 |
Croazia |
HRN 1130-1:2008 HRN 1130-4:2008 HRN EN 10080:2005 |
|
Serbia
|
SRPS EN 10080:2008 | |
Bosnia
|
ISO 6935 – EN 10080 | |
Montenegro
|
||
B500B |
Slovenia |
STS-05/019 |
Croazia |
HRN 1130-1:2008 HRN 1130-4:2008 HRN EN 10080:2005 |
|
Serbia
|
SRPS EN 10080:2008 | |
Bosnia
|
ISO 6935 – EN 10080 | |
Montenegro
|
||
Malta
|
BS 4449 |
Standard Meshes
| Mesh type | Ø long. |
Ø trasv. |
Mesh long. |
Mesh trasv. |
panel dimension |
Weight/panel | Panel/pack |
| [mm] | [mm] | [cm] | [cm] | [cm] | [kg] | ||
R 131 |
5 | 5 | 15 | 25 | 215×600 | 21.81 | 50 |
R 189 |
6 | 5 | 15 | 25 | 215×600 | 27.93 | 50 |
R 196 |
5 | 5 | 10 | 25 | 215×600 | 28.27 | 50 |
R 283 |
6 | 5 | 10 | 25 | 215×600 | 37.25 | 50 |
R 335 |
8 | 5 | 15 | 25 | 215×600 | 43.50 | 50 |
R 385 |
7 | 5 | 10 | 25 | 215×600 | 47.81 | 40 |
R 424 |
9 | 6 | 15 | 25 | 215×600 | 56.37 | 40 |
R 503 |
8 | 5 | 10 | 25 | 215×600 | 60.09 | 30 |
R 524 |
10 | 6 | 15 | 25 | 215×600 | 66.99 | 30 |
R 636 |
9 | 6 | 10 | 25 | 215×600 | 77.32 | 25 |
R 785 |
10 | 7 | 10 | 25 | 215×600 | 97.03 | 20 |
Q 139 |
4.2 | 4.2 | 10 | 10 | 215×500 | 23.71 | 50 |
Q 131 |
5 | 5 | 15 | 15 | 215×600 | 27.10 | 50 |
Q 188 |
6 | 6 | 15 | 15 | 215×600 | 39.07 | 50 |
Q 221
|
6,50 | 6,50 | 15 | 15 | 215×600 | 45,76 | 40 |
Q 196 |
5 | 5 | 10 | 10 | 215×600 | 40.19 | 50 |
Q 257 |
7 | 7 | 15 | 15 | 215×600 | 53.15 | 40 |
Q 283 |
6 | 6 | 10 | 10 | 215×600 | 57.94 | 25 |
Q 335 |
8 | 8 | 15 | 15 | 215×600 | 69.45 | 25 |
Q 385 |
7 | 7 | 10 | 10 | 215×600 | 78.82 | 25 |
Q 424 |
9 | 9 | 15 | 15 | 215×600 | 87.82 | 20 |
Q 503 |
8 | 8 | 10 | 10 | 215×600 | 102.99 | 20 |
Q524 |
10 | 10 | 15 | 15 | 215×600 | 108.59 | 20 |
Q 636 |
9 | 9 | 10 | 10 | 215×600 | 130.24 | 15 |
Q 785 |
10 | 10 | 10 | 10 | 215×600 | 160.92 | 10 |
Chemical Composition of Meshes B500A and B500B
| Limiti | C % | P % | S % | N % | Cu % | Ceq % | |
Pittini |
max | 0.24 | 0.055 | 0.055 | 0.014 | 0.85 | 0.52 |
EN10080 |
max | 0.24 | 0.055 | 0.055 | 0.014 | 0.85 | 0.52 |
REMARKS:
– It’s allowed C max = 0.25% purché if Ceq max 0.48%
Mechanical and Size Characteristics of Meshes B500A
| Standard | Country | Ø [mm] |
Weight tol. [%] |
Re min [MPa] |
Rm/Re min |
Rm/Re,nom max |
Agt min [%] |
Rt min [%] |
Pittini |
Slovenia |
5 ÷ 10 | remarks | 500c | 1.05c | 1.05c | 2,5c | 30 |
Croatia |
5 ÷ 10 | remarks | 500c | 1.05c | 1.05c | 2,5c | 25 | |
EC2 |
5 ÷ 16 | remarks | 500c | 1.05c | 1.05c | 2,5c | 30 |
REMARKS:
– Tests after artificial aging at 100°C/1h
– Test of bends and folds to be carried out according to relatives standards
– Weight tolerances: ± 4.5% for diameters larger than 8 mm; ± 6% for diameters up to 8 mm
Mechanical and Size Characteristics of Meshes B500B
| Standard | Country | Ø [mm] |
Weight tol. [%] |
Re min [MPa] |
Rm/Re min |
Rm/Re,nom max |
Agt min [%] |
Rt min [%] |
| Pittini |
Slovenia |
6 ÷ 10 | remarks | 500c | 1.08c | 1.3c | 5c | 30 |
Croazia |
6 ÷ 10 | remarks | 500c | 1.08c | – | 5c | 25 | |
| EC2 | 5 ÷ 16 | remarks | 500c | 1.08c | – | 5c | 30 |
REMARKS:
– Tests after artificial aging at 100°C/1h
– Test of bends and folds to be carried out according to relatives standards
– Weight tolerances: ± 4.5% for diameters larger than 8 mm; ± 6% for diameters up to 8 mm
Gallery
Sales Organization
A continuous and reliable service is guaranteed by Pittini Group’s Sales Department.
Contact our designated representative: