With plants devoted to the production of electrowelded wire mesh and comprehensive commercial and technical support, the Pittini Group is a leading manufacturer of electrowelded wire mesh for the European market. All products are manufactured from steel produced in the steelworks of the Group and high quality standards are constantly monitored throughout the manufacturing cycle.
Download technical sheet Meshes
The standard electrowelded meshes produced in Osoppo obtained the EPD Certification – Environmental Product Declaration – by the certifying partner ICMQ, the Institute for certification and quality branding for products and services for construction.
| Steel Grade | Country | Certification Body | Standard |
B500B |
SWITZERLAND | EMPA | SIA 262 |
| Mesh type | Ø long. |
Ø trasv. |
Mesh long. |
Mesh trasv. |
Panel dimension | weight/panel | panel/pack | panel/hold |
| [mm] | [mm] | [cm] | [cm] | [cm] | [Kg] | |||
K 188 |
6 | 6 | 15 | 15 | 200×500 | 30,19 | 50 | 400 |
K 283 |
6 | 6 | 10 | 10 | 200×500 | 44,40 | 30 | 270 |
K 335 |
8 | 8 | 15 | 15 | 200×500 | 53,70 | 30 | 210 |
On request is possible to produce customised meshes and/or design to meet specific requirements of legislation or special computing needs.
On request electro-welded meshes up to diameter of 14mm can be produced.
| Limits | C % | P % | S % | Cu % | N % | Ceq % | |
Pittini |
max | 0.24 | 0.055 | 0.055 | 0.85 | 0.014 | 0.52 |
SIA 262 |
max | 0.24 | 0.055 | 0.055 | 0.85 | 0.014 | 0.52 |
| Standard | Gamma diametri [mm] | Weight tol.[%] | Re min [MPa] |
Re/Renom max |
Rm/Re min |
Agt min [%] | Rt min [%] |
Pittini |
6 ÷ 8 | note | 500c | 1.30 | 1.08c | 5.0c | 25 |
SIA 262 |
6 ÷ 8 | note | 500c | 1.30c | 1.08c | 5.0c | 25 |
REMARKS:
– C characteristic val.
– Tests after artificial aging at 100°C/1h
– Weight tolerances: ± 4.5% for diameters larger than 8 mm; ± 6% for diameters up to 8 mm
A continuous and reliable service is guaranteed by Pittini Group’s Sales Department.
Contact our designated representative: